Hdpe Pipe Jointing Machine

Hdpe Pipe Jointing Machine

Hdpe Pipe Jointing Machine is suitable for butt welding of plastic pipes made of HDPE ,PVDF and MPP in construction site or workshop. It consists of basic frame, hydraulic unit, planing tool, heating plate, support for planing tool & heating plate and optional parts. This machine also has removable PTFE coated heating plate with high accurate temperature control system.

Advantages

Hdpe Pipe Jointing Machine uses thickened and widened tile clamps, which can effectively avoid many problems such as slippery pipe joints in welding pressure, uneven pressure on long pipes and wasted time and wasted pipes. Also, this jointing machine uses a locking cutter foot to fix the cutter firmly on the sliding shaft, which makes the milled plane more flat.

Specification

Feature

1. Ritmo Hdpe Pipe Jointing Machine has fully automatic control of welding time, temperature and pressure;

2.Automatic detection and compensation of towing pressure;

3.The heating plate automatically pops up, and the temperature loss is minimized;

How do you connect two HDPE pipes together?

To connect two HDPE pipes together, you would use a butt fusion welding process. This involves heating the ends of the pipes to a specific temperature and then pressing them together. The ends are then held together while they cool and fuse together. This creates a strong joint that will withstand pressure and won't leak.

What is the temperature for HDPE pipe jointing?

HDPE pipe jointing is typically performed at an ambient temperature of 40-60°F (4-16°C). The material being joined must also be at or above the same temperature.If hot air welding is used, the joining surfaces should be pre-heated to a minimum of 230°F (110°C).

Hot Tags: Hdpe Pipe Jointing Machine, China, manufacturers, suppliers, factory, wholesale, poly fusion machine, hdpe fusion equipment, fusion machine for ppr, plastic fusion machine, ppr socket welding machine, orbital pipe welding machine