The welded pipe unit will always be damaged during normal work. How to properly maintain it in daily life so as to prolong its service life is a problem that everyone cares about. Let me explain to you below.
In the process of use, it is necessary to operate in strict accordance with the operation procedures in the manual. Before the operation of the machine, it is necessary to check whether the various parts of the machine can work normally and whether there is any failure. Only when the parts and indicators of the machine are normal, we will It can be started and put into production, otherwise it will cause loss of machinery.
After checking the components of the welded pipe unit, start the operation. In the process of mechanical production, it is necessary to ensure the stability of the temperature of the machine and the production conditions. If the machine fails, we need to stop production in time and check which parts of the machine are faulty to avoid Cause greater losses, the main faults include unstable mechanical operation and whether there are abnormal noises during operation, and problems should be checked in time.
After the machine has been used for a period of time, it is necessary to regularly lubricate and clean the machine to ensure that it is clean. Only in this way can the machine run normally and it is lighter during use. The aging parts in the machine need to be replaced in time to ensure the normal operation of the machine. When the machine is not in use, the welded pipe unit should also be kept well and cannot be discarded arbitrarily.
Common maintenance methods:
1. On weekdays, the inspection of the pipe welding machine should be done to check whether the pipeline is normal, and the mechanical condition of the solid-state pipe welding machine should be recorded truthfully. If it is found that the solid-state pipe welding machine has future risks, it should be repaired quickly so as not to affect the normal use below.
2. The parts of the welded pipe machine that need to be lubricated should be lubricated on schedule, and lubricated with special lubricants to prevent the welded pipe from rusting. Galvanizing is a good way to prolong the service life of the welding machine. Before galvanizing the steel pipe, surface pretreatment is required. Including degreasing (degreasing is to clean the oil stains and dirt on the outside of the black pipe, in order to prevent the effect of pickling and pickling, and can be burned or alkali to complete the daily alkali washing) washing, pickling, rewashing, etc.
3. Although alkaline cleaning has cleaned up some stains, pickling and alkaline cleaning are different for pollution. The purpose of pickling is to remove the iron oxide scale on the mechanical surface of the pipe welding machine. Pickling can be carried out at room temperature, with less metal corrosion and absorption. The amount of hydrogen is small, the compatibility of carbon black residues is small, the acid pickling forms oxides, the depth is large, it is easy to clean, and it has no effect on galvanizing.
The above has introduced the relevant content about the maintenance and maintenance of the welded pipe unit. I hope that the above content will be helpful.
